• Standard Motor Kit

    9.7v DC motor with encoder prewired with connector for Matrix Controller, 1.4 kg-cm torque, 195 rpm. Includes: aluminum double flanged motor plate, four 4mm M3 button head cap screws for motor mounting, & a molded 4mm polycarbonate spacer.


  • Servo Ext. Wire Kit

    Give your servo some space to work beyond the basic wire length with our two extension wires. Includes: one 200mm ext. wire & one 450mm ext. wire


  • Power Switch Kit

    The power switch kit contains an on/off switch and wiring harness to connect between the battery and the MATRIX controller. The kit is fully assembled with a mounting bracket and wiring harness.


  • Matrix 9V Battery

    This 9.6v, 2400 mAh capacity, NiMH battery provides ample power for your heavy-duty MATRIX robot.


  • FTC Samantha Power Cable

    The FTC Samantha Power Cable powers the Samantha module formerly used in the FIRST FTC competition. It connects to the HiTechnic battery box providing reliable power from 6AA batteries.


  • Controller

    The Matrix Controller by HiTechnic connects to a LEGO NXT or EV3 allowing you to control up to four MATRIX servos and four MATRIX DC motors.


  • 12v 4mm Motor Kit with Powerpoles

    12v 4mm DC motor with a built in encoder, encoder wire, and Anderson Powerpoles. Mounting bracket included.


  • 12V 3000mAh NiMH Battery

    This size battery is the most popular battery for use in FIRST Tech Challenge. It has a Tamiya connector and a in-line 20A fuse.


  • Standoff Spacer Service Pack

    Zinc plated steel hex M4 stand-off posts. Includes 12 16mm posts and 12 32mm posts.


  • Quick Connect Service Pack

    Connect your robot design with Quick Connect rivets in 3 sizes. Allows for fast builds without the use of tools, perfect for classroom instruction and demonstration. These quick connects can be removed by pressing the pin out from the back and then reused. Short quick connect perfect for two layers of metal, medium white rivet for three layers of metal and the long black rivet for connecting one layer of metal to a LEGO® Technic™ beam.


  • Nylon Washer Service Pack

    Washers can be used as spacers between various parts. Shoulder washers are used to protect LEGO® parts from direct contact with screws.


  • Molded Spacer Pack

    A collection of 8mm and 4mm spacers to enable you to build mechanisms and keep your design on the Matrix 8mm grid. Includes: 12 x 8mm spacers & 12 x 4mm spacers


adidas yeezy boost v3 shoe adidas yeezy boost v2 shoes adidas yeezy boost 350 v3 shoe adidas yeezy boost 350 v2 shoes adidas yeezy boost 350 v2 black red adidas yeezy boost 350 v2 black white adidas yeezy boost 350 v2 triple white adidas yeezy boost 350 v2 cream white adidas yeezy boost 350 v2 black adidas yeezy boost 350 v3 grey adidas yeezy boost 350 v3 yellow